Crystal beads are a great way to add sparkle and individuality of almost everything you own. And what is easier to start and cheap.

In this guide you will discover the type of pearls that you can buy the tools that you’ll need and the technique that you can use to apply them.

What kind of Crystal beads want?

If you would to apply gems to your assets, then the type you will need ar called ‘ flat ‘. These types of crystals have flat-side glue that Crystal pearls to bonds.

There ar two types of flat back crystals.

Hot fix back flat beads ar already applied with glue and ar designed to be attached to elements that have a high melting point, such as cotton or jeans.

Silver Foil beads the rear plate is needed add the glue you. These work best when you want to connect to objects with a lower melting point, such as plastics or synthetic fibers.

What can apply Crystal beads?

The most popular items for attaching crystals are clothing like t-shirts, jeans, jackets; accessories such as shoes, belts, hats, purses, cell phones and their nails!

In this guide we will use hot fix beads on a cotton t-shirt.

Other tools what would you like?

Adhesives, hot fix (apply the beads, before securing it to the element you’re decorating)
Scotch tape (to keep your structure model in position)
Iron and ironing board (the heat will make the binding glue)
Teflon sheet or paper (to cover your design when you iron
A clear glass or a plastic sheet (to protect your design as you create it)
Tweezers or plyers (to put your Crystal beads in place)

How to create your first design bead crystal

1. create your design and model

You’ll be able to pull out your design on paper, then depending on your confidence or skill level, it’s probably best to start with something simple.

Once you’ve elect your drawing and sketched on paper, use scotch tape to fasten it to your piece of glass or plastic, making sure that your design is showing through the other side.

Then, cut a piece of your hot cover sticker Fixer model, remove the white adhesive coating and secure it in place on the other side of the glass or plastic with scotch tape.

2. apply your Crystal model

Once the model is ready you can start applying your beads using tweezers. You can apply the flat side rear side adhesive hot fix of your model.

3. apply your ruined project to your t-shirt

Once you have all your beads, take your t-shirt and lay it on the table. Then peel off the adhesive side with hot fix crystals attached and place it on your t-shirt.

Then finally, take your Teflon sheet or paper glued, placed over the design and the iron on it for about 2-3 minutes. This should be enough time for your design firmly at your t-shirt (if not, just for another(a) minute) or two until sure.

And there you have it. In three simple steps that you’ve created your first design of Crystal bead. The only thing that limits you is your imagination now!

Article source: http://EzineArticles.com